|
MIXING & EFFECTS
Fruity Delay 2
 Fruity Delay 2 is an enhanced
version of the Fruity Delay VST
plugin, with refined controls and some additional features, such as
stereo offset and panning control for the input signal. |
Parameters
Input Section
Allows you to tune the volume and panning of the input
signal.
- Panning wheel (PAN) - Sets the panning of the
input signal.
- Volume wheel (VOL) - Sets the volume of the
input signal.
Feedback Section
Sets various options for the echo feedback.
- Normal/Inverted/Ping Pong - Normal keeps the
stereo data consistent with the input signal; Inverted switches the
left and right channels in the feedback (so if the input is panned
to right, the feedback will be panned to left); Ping Pong works
like Inverted, but switches the left and right channels repeatedly
for each echo generated (thus creating a "ping pong" effect).
- Volume wheel (VOL) - sets the volume of the
feedback. Setting this to maximum will create feedback that never
fades out, while setting it to minimum (spun maximum to left) will
result in no feedback.
- Cutoff wheel (CUT) - sets the cutoff frequency
amount for the feedback. Using this feature allows you to "smooth
out" echoes as they fade out thus creating more natural
effect.
Time Section
Contains the time settings of the delay effect.
- Time wheel (TIME) - sets the signal delay time
(and amount of time between echoes in the feedback). This setting
is tempo based. If you want to set the time to an exact number of
steps, right-click the wheel and from the popup menu that appears
select the Set submenu for a list of presets.
- Stereo Offset wheel (OFS) - lets you set a
time offset for the left or right audio channel, thus creating
richer stereo panorama of the delay effect. To delay the left
channel, spin the wheel to the left. To delay the right channel,
spin it to the right. To remove the time offset between channels,
reset the wheel (right-click the wheel and select the Reset
command).
Dry Section
Contains a single wheel (VOL) that sets the amount of "dry"
(unprocessed) signal to be mixed with the "wet" (processed by the
effect) signal.
If you want to use Fruity Delay 2 in a send track, it is
recommended to set the dry volume to 0 (the wheel spun maximum to
left).
Plugin Credits: Didier Dambrin
|
