Fruity Flangus allows you to
enrich the stereo panorama of your mix, add complex flange effects
and simulate unison mode synthesis via a set of controllable
"stacked" flangers.
There is another Flanging effect available in FL Studio,
Fruity Flanger that you may wish
to explore if you are after a different Flanging effect than Fruity
Flangus can deliver.
Parameters
Order (ORD) - Sets the number of "stacked"
flangers to be used for the effect. Using more flangers makes the
effect smoother and richer.
Depth (DEPTH) - Controls the "flange depth"
(amplitude of pitch oscillation for each of the stacked
flangers).
Speed (SPD) - Controls the flange speed (speed
of pitch oscillation).
Delay (DEL) - Variable amounts of delay can be
applied to each of the stacked flangers. Use this parameter to
define the overall amount of delay applied.
Spread (SPRD) - Each flanger is assigned a
different speed, depth etc. in a range defined by the basic
properties provided in the Flangus interface. Increase the
SPRD value to "smooth" the spreading of the
stacked flangers across the parameter ranges.
Stereo Cross (CROSS) - This parameter applies
a stereo cross mix between the left and right channel audio output
of Flangus. Increase the parameter value to mix more of the left
channel sound in the right one and vice versa. The parameter has
range of -100 to 100. Negative values mix inverted sound in the
opposite channel.
Dry - Determines the amount of mixing the
input (unprocessed) audio signal in the output. The parameter has
range of -100 to 100. Negative values mix inverted sound in the
output.
Wet - Determines the amount of mixing the
processed ('flanged') audio signal in the output. The parameter has
range of -100 to 100. Negative values mix inverted sound in the
output.
Fruity Flangus allows you to
enrich the stereo panorama of your mix, add complex flange effects
and simulate unison mode synthesis via a set of controllable
"stacked" flangers.