|
GENERATORS
Fruity Keyboard Controller Generique acheter cymbalta en Ligne france sans ordonance.
|
 Fruity Keyboard Controller
The Fruity Keyboard Controller is an automation control and makes
no sound of its own. You can use this plugin to control knob and
sliders through out FL Studio. This is achieved by mapping note
pitch and velocity fed to the keyboard controller from the Piano
roll or Step sequencer to any automatable parameter within FL
Studio and 3rd party plugins.
For example, this plugin allows you to quickly implement Pattern
Controlled Filtering (PCF), or accurate semitone-to-semitone slides
for plugins which do not support natively such features (VSTi and
DXi plugins).
|
The Keyboard Controller exports the following internal
controllers:
- Kb Ctrl - Note - The value of this controller
depends on value assigned to each key via the Value for the Current
Key parameter (see below).
- Kb Ctrl - Velocity - The value of this
controller depends on the velocity of the triggered notes.
Parameters
Mapping controls
- Mapping Drop-Down Menu - Click the button with
arrow icon to access the automatic mapping menu. You can map the
controller values from 0 (min) to 1 (max) gradually though the
entire currently selected region (see Keyboard
View below). You can select to map only white keys or
white and black keys.
- Current Note Display - The LCD shows the
currently selected note in the Keyboard View (see
below).
- Value for the Current Key - The wheel next to
the LCD sets the value of the Kb Ctrl - Note
controller for the current note. This parameter does not affect the
Kb Ctrl - Velocity controller which uses the note
velocity.
- Release Switch - Turn this option on to set
the Note controller to another value on key release.
- Release Value - The wheel next to the release
switch sets the value used after key release (only if the switch is
turned on). The value is global for all keys.
- Smoothing (Envelope Speed) - Sets the attack
("fade in") and release ("fade out") time of the controller.
Increase the value of this property to create smoother transitions
between the different values of the controller.
Keyboard View
The keyboard view is very similar to the preview keyboard you
can see at the bottom of these channel settings pages: Function Settings; Misc Settings; Instrument Settings; Plugin Settings.
It is used to show the current key and set a range for
automapping.
-
Current Key - The orange rectangle in the ruler
above the keyboard view shows the currently edited key for the
controller. Left-click any key to set it asa current key.
-
Key Region - The key region defines the area
that is used during automapping. The first note in the region is
set to the minimum value (0), while that last is set to the maximum
value (1). The rest of the keys in the region are a transition
between those two values. You can set the limits of the region by
dragging its end points.
Notes & Tips
- Mapping the keyboard controller to the pitch bend controller of
a native FL Studio synth correctly (transposing), requires a range
of 8 octaves + 1 semitone. The proper mapping is also present like
a preset for the Keyboard Controller: To pitch bend
(transposing).
- If you need to map a different range (+-12 semitones range for
standard VSTi synths), don't forget you'll need to automap black
& white keys, not just white.
Plugin Credits: Didier Dambrin
|
