|
MIXING & EFFECTS
Fruity Stereo Enhancer
 Fruity Stereo Enhancer contains
various filters and processors to alter and enrich the stereo image
of the input sound. |
Parameters
- Stereo Separation wheel (STEREO SEP) - This
parameter lets you increase or decrease the stereo separation of
the input signal. It won't have effect in mono input. The value
ranges from 0% (turned maximum to right) to 200% (turned maximum to
left). At 0% separation the signal becomes mono, at 100% the stereo
image remains unaltered.
- Pre/Post switch - Lets you choose if you want
the phase offset effect applied before the other filters in that
plugin (PRE) or after the other filters (POST).
- Phase offset - This changes the phase of the L
or R channels. Top dead centre is normal phase, turning the knob
right will progressively offset the phase of the right channel
while turning the knob to the left will progressively offset the
phase of the Left channel. The phase offset is achieved by delaying
the affected channel by up to 500 ms.
- Invert switch - With this filter you can
invert the phase in one of the audio channels. NONE disables the
effect, LEFT inverts the left audio channel, RIGHT inverts the
right audio channel.
- Panning wheel (PAN) - Lets you set the panning
of the output. When used with small delays, the phase offset effect
can make the sound seem panned to left or right. Then you can use
this wheel to compensate for this effect.
- Volume wheel (VOL) - Lets you set the volume
of the output. In some cases the stereo separation filter may
decrease on increase the volume of the output, then you can use
this wheel to compensate for this effect.
Plugin Credits: Didier Dambrin
|
