|
GENERATORS
Wasp Purchase cialis 5 mg
DEMO ONLY: Wasp XT comes as a demo version in
FL Studio and needs to be purchased separately in order to save
projects containing Wasp XT channels.
 Wasp XT is a 3-oscillator
synth with 2 LFO's and 2 ADSR envelopes, a ring modulator, FM, PWM
and a distortion unit. Wasp XT is an update of the Wasp plugin. |
Parameters
Filter Section
The Filter section is located on top left.
- Keyboard track (KB.TRK) - Scales the cut-off
frequency on the note played - higher notes can have a higher
cut-off, lower notes can have a lower cut-off.
- Envelope Amount (ENV) - The relative scaling
of the cut-off frequency in response to ADSR.
- Cut-off (CUTOFF) - Adjusts the Filter cut-off
frequency.
- Resonance (RESO) - Adjusts the Filter
resonance.
- Filter Types -
- Buttons select the following filter types - LP
= 12 dB Lowpass Filter, LP FAT = 24 dB Lowpass
Filter, LP+NT = 12 dB Lowpass + Notch Cascade,
DBL.NT = double notch filter, BP
= 24 dB Bandpass Filter, HP = 24dB Highpass
Filter.
Oscillator section
- Coarse Tuning (COARSE) - The two CRS wheels
set the pitch for the first and second oscillators. Coarse tuning
is adjustable in the range -3/+3 octaves.
- Fine Tuning (FINE) - The two CRS wheels set
the pitch for the first and second oscillators (fine tuning in
-1/+1 semitone).
- Oscillator Shape - Red buttons set the shape
for the first two oscillators. The third oscillator can only use
square or sawtooth shape.
- Mix Slider (OSC MIX) - The slider between OSC1
and OSC2 adjusts the mix of the oscillators in the final sound.
Slide max to left to hear only OSC1, slide max to right to hear
only OSC2.
- Amount (AMT) - Sets the volume of the third
oscillator, which is zero (inaudible) by default.
- Ring Modulator (RINGMOD) - If turned on,
modulates oscillator 1 and 2. This often leads to a harsh metallic
sound, dependent on the shapes and frequencies of the
oscillators.
- Pulse Width (PW) - This property has effect
when at least one of the oscillators is set to the square shape. It
shortens 1 of the square shape sides, thus altering the final
sound. Turn max to left to use the default square shape.
- Frequency Modulation (FM) - When turned on,
modulates the frequency of oscillator 2 with the output of
oscillator 1. To hear the effect, set the mix slider to the right.
Classic FM uses sine waves (the 3rd oscillator shape).
LFO-1
- LFO Shapes - the red buttons select the LFO
shape to be used. This can be sawtooth, square, sine or noise.
- OSC 1+2 / FILTER / PW - LFO-1 can modulate the
pitch of the output (OSC1+2), the filter cut-off frequency (FILTER)
or the Pulse Width (PW) depending on the highlighted option.
- SYNC - Synchronizes the frequency of the LFO
to a multiple of the current tempo.
- RESET - Sets the LFO to the beginning of the
LFO waveform (phase is zero) when a note is triggered.
- AMOUNT - Sets the effect's strength over the
controlled value.
- RATE- Sets the modulation speed.
LFO-2
- LFO Shapes - the red buttons select the LFO
shape to be used. This can be sawtooth, square, sine or noise.
- OSC 1 / OSC MIX / AMP - LFO-2 can modulate the
pitch of Oscillator 1 (OSC1), the mixing ratio of oscillator 1
& oscillator 2 (OSC MIX) and the volume of the whole output
(AMP).
- SYNC - Synchronizes the frequency of the LFO
to a multiple of the current tempo.
- RESET - Sets the LFO to the beginning of the
LFO waveform (phase is zero) when a note is triggered.
- AMOUNT - Sets the effect's strength over the
controlled value.
- RATE - Sets the modulation speed.
Amplitude ADSR
This is a standard ADSR volume envelope. The link button links
the filter and amplitude envelopes for editing convenience.
Filter ADSR
This is a standard ADSR filter envelope.
MOD ENV
- Attack (ATK) - The rate at which the
modulation takes effect.
- Decay (DEC) - The rate at which the modulation
releases.
- Amount (AMT) - Amount of modulation of the
above two controls.
- Modulation destination switches -
- PW - Pulse width.
- LFO 1 AMT - LFO 1 modulation amount.
- OSC 1 LEVEL - OSC 1 Volume.
- OSC 2 PITCH - Tuning of OSC 2.
Output
- TONE - Changes the color of the distortion.
Turned to the left, the sound gets muddy, turned to the right, more
bright.
- Amount (AMT) - Adjusts the drive. More drive
means heavier distortion.
- Volume (VOL) - Adjusts the final output volume
of the Wasp XT plugin.
- Drive - The red button turns the distortion
unit on/off.
Plugin Credits: Richard Hoffmann
|
