|
WAVE EDITOR
Pop-Up Menu  . teeth whitening in, dentist in London, veneers london.
This page covers the commands available on the wave editor's
right-click menu.
Horiz Zoom Mode
Switches to Horizontal zoom mode. A magnifying glass will
appear, left-click and drag horizontally over the region you wish
to zoom.
Cut
Moves the selection to the clipboards
Copy
Copies the selection to the clipboard.
Paste
- Paste Over - Replaces the selection with the
clipboard contents (if the selection is shorter, only part of the
clipboard contents are used).
- Paste Insert - Insert the clipboard contents
at the start of the current selection.
- Paste to Stereo – Pastes the wav as a stereo
file.
Crop
Trims the sample to include only the selected section, by:
- Loop - Crops the wave so that only the loop
section remains.
- Selection - Crops the wave so that only the
selection remains.
- End Loop Marker - Removes the content after
the loop end marker.
Goto
- Loop Start - Scrolls the view (if necessary)
to the loop start position.
- Loop End - Scrolls the view (if necessary) to
the loop start position.
- Selection Start - Scrolls the view (if
necessary) to the loop start position.
- Selection Start - Scrolls the view (if
necessary) to the loop start position.
Selection
- Select All - Selects the entire wave.
- Select Loop - Selects the loop area.
- Selection = Left - Selects only the left
channel.
- Selection = Right - Selects only the right
channel.
- Selection = Both - Selects both channels.
Scroll
- Scroll Left - Scroll the view to the
left.
- Scroll Right - Scroll the view to the
right.
Zoom
- Selection - Zooms to the current
selection.
- In Vertically - Zooms in vertically.
- Out Vertically - Zooms out vertically.
- In Horizontal Maximum - Zooms in vertically to
the maximum zoom level allowed.
- Out Horizontal Overview - Zoom out vertically
to see the entire span of the wave.
- In Vertically - Zooms in vertically.
- Out Vertically - Zooms out vertically.
- In Horizontal Maximum - Zooms in vertically to
the maximum zoom level allowed.
- Out Horizontal Overview - Zoom out vertically
to see the entire span of the wave.
File
- Open - Click this button to open a sample for
editing.
- Save - Saves the changes to the edited
sample.
Play
- Play Selection - Plays only the part of the
wave you have selected.
- Play Loop - Play the loop determined by the
loop points of the wave (if any).
- Play All - Plays the entire sample.
- Play Selection Unlooped - Plays only the part
of the wave you have selected without looping.
- Stop- Stops playback.
Process
Contains the following set of commands to process the wave (most
commands require selection to operate properly):
- Fade In - Applies a fade in effect to the
selection.
- Fade Out - Applies a fade out effects to the
selection.
- Normalize - Increases the overall sample
volume as much as posisbel before clipping occurs.
- Reverse - Reverses the direction of the
selected part of the wave.
- Invert - Inverts the polarity of the selected
part of the wave.
- Stereo <-> Mono - Toggles the wave
betwene mono and stereo format. NOTE: When
converting from stereo to mono, all stereo data will be lost and
can not be restored by switching later back to stereo.
- Swap Channels - Swaps the left and right
channels in a stereo sample.
- DC Removal - Centers the wave if it has DC
offset.
- Crossfade Loop - Crossfades the looped section
of the sample (not selection!) to fix any occuring clicks and pops
at the loop points.
Settings
Opens the wave editor's Settings window.
About
Brings a dialog containing information about the wave editor
product.
| 
