|
WAVE EDITOR
Settings 
This page covers the settings window of the integrated wave
editor.
View
- Status Bar - Displays a status bar displays
useful information, such as loop points position, total sample
length etc.
Play
- Loop - If checked, the wave will loop
playback, otherwise the wave is played once and the playback
stops.
Record
- Auto Start FL - FL Studio starts playing as
soon as recording starts.
- Reset FL - The song position of FL Studio
resets to start when recording.
- Recording Time - Sets the maximum record time
to be used in record mode. Using larger value requires more memory
and disk space.
- Recording Buffer - Increase the recording
buffer if the recording is instable and there are repeating
fragments, pops and clicks.
- Peak Meter Range - Sets the range of the peak
meters displayed in record mode.
- Crop/Threshold - Check the Crop option if you
want the silence on both sides of the wave to be cropped. The
threshold option sets the noise level of the record - i.e. all
sound with lower volume than the value specified is considered
silence.
- Pause Record - Recording start in paused mode
so you can adjust recording levels and prepare to start.
- Path - Sets the location and name to the wave
used for recording.
I/O Device
- In - Select here the device to be used when
recording.
Loop
- Snap to Zero Crossing - If checked, the loop
points will be snapped to the first zero sample nearby. This allows
for smoother loop points to avoid clicks and pops while playing the
looped sample.
|
